What the mysterious black diamonds on measuring tapes are meant for?
THE BLACK DIAMONDS The diamond marks on tape rule blades are for spacing these engineered floor joists in new construction. Because these beams can support more weight than their dimensional lumber counterpart, they often have different spacing requirements.
What is M on a measuring tape?
On many tapes (but by no means all) you will find a small red rectangle with the letter M printed inside followed by a number. The number simply denotes the year that the blade was stamped as conforming to the Measuring Instruments Directive. On the whole this will also be the year in which that tape was manufactured.
What is the red dot on a tape measure?
The red indicates 16-inch-on-center spacing. This is a common framing spacing for wall studs, floor joists and common roof rafters. If you decide to space framing at 24-inch centers, the red marks will be at every other foot marking on the tape measure.
Where is the 5/16 mark on a tape measure?
To read a tape measure find the number next to the large tick, and then find how many small ticks past it the measurement is. Add the number next to the large tick with the fraction to get the measurement. eg. if your 5 ticks past the number 4 tick then the measurement is 4 5⁄16“.
What is the 8 foot rule?
It’s called the 8-foot rule. A leader at a manufacturing facility recently gave the direction to his leadership team to engage with their employees every time they come within eight feet of one of their employees. It’s a simple rule that is simply brilliant!
What is the tape measure trick?
Here is how the trick works. Pull out the tape measure and fold in half so that the metal end of the tape measure is lined up to the current year. Your tape measure should be doubled back on itself. Since it is 2011, you need to line up the end of the tape with 111. Next, find the year you were born.
Can you measure your shoe size with a tape measure?
Measure the width of your foot by using your measuring tape or ruler to measure from the line on one side of your tracing, to the line on the other side. Again, be certain to find the closest mark that you can (for inches, use the closest 16th mark).
Does Walmart sell tape measures?
Tape Measures – Walmart.com.
What is a Class 1 tape measure?
Classes explained Class 1 rated tapes are the most accurate and an error of no more than ±1.1mm over a 10m length can be anticipated, where a steel tape is used with a pulling force of 50N at 20°.
Why is there a hole in the end of a tape measure?
If you’ve ever used one of these handy tools, you may have noticed a slim hole in the loose hook at the end of the tape. As explained by DIY guru Leah from See Jane Drill, the hole is to be used to secure the tape measure in place as you work. A simple nail does the job and lets you work with less room for error.
Why are tape measures yellow?
Tape measures often have black and red measurements on a yellow background as this is the optimal color combination for readability.
How many 16ths are in an inch?
you will need a ruler or tape measure that can measure 1/16”. The shortest line is the 1/16” (one sixteenth of an inch) and there are eight of those. If you count the distance between the inch marks (one inch) you will find sixteen lines. This is because an inch is 16/16th of an inch long.
What is 1/16 on a measuring tape?
The 1/16-inch mark is the absolute shortest line on the tape measure. It is also the first line that you will encounter after or before a whole-inch mark.