Why is 16 inches marked on a tape measure?
Most tapes that have this only do it for the first few inches on the tool. As you extend the tape measure, you’ll probably see the numbers 16, 32, 48, 64, 80, 96 and so forth in red. The red indicates 16-inch-on-center spacing. This is a common framing spacing for wall studs, floor joists and common roof rafters.
What are the 16th marks on a tape measure?
Tape measures usually have a red mark every 16 inches. This makes it convenient to mark off wall studs or joists, which typically are 16 inches apart. Unless you are dealing with wall studs or joists, you can ignore this marker.
Where is the 5/16 mark on a tape measure?
To read a tape measure find the number next to the large tick, and then find how many small ticks past it the measurement is. Add the number next to the large tick with the fraction to get the measurement. eg. if your 5 ticks past the number 4 tick then the measurement is 4 5⁄16“.
What is the 8 foot rule?
It’s called the 8-foot rule. A leader at a manufacturing facility recently gave the direction to his leadership team to engage with their employees every time they come within eight feet of one of their employees. It’s a simple rule that is simply brilliant!
Why is a tape measure curved?
Have you ever wondered why the blade on your tape measure is curved? The concave design helps keep the blade rigid when extended. This curve allows the blade to “stand out” while measuring and helping you read the measurement.
How many 16ths are in an inch?
If you count the distance between the inch marks (one inch) you will find sixteen lines. This is because an inch is 16/16th of an inch long.
What is M on a measuring tape?
On many tapes (but by no means all) you will find a small red rectangle with the letter M printed inside followed by a number. The number simply denotes the year that the blade was stamped as conforming to the Measuring Instruments Directive. On the whole this will also be the year in which that tape was manufactured.
How many 32nds are in an inch?
The tire industry standard for tread depth in the United States is measured in one thirty-second of an inch (1/32″) increments (millimeters are used in countries observing metric standards). New tires typically start with a tread depth of 10/32″ to 12/32″, with some off-road tires topping 15/32″.
What is Black Diamond on measuring tape used for?
Ever noticed the little black diamonds or triangles on your tape measure? The diamonds start at the 19.2 inches mark on the tape and can be utilized to help correctly space the floor trusses for a 4×8 T&G sub-floor with a span rating of 20” o.c. The black diamonds provide a visual cue to help you work faster.
How many inches are in a foot?
What is 11/16 on a ruler?
Fraction, Decimal, and Millimeter Equivalent Measurements
Are Stanley tape measures guaranteed for life?
Limited Lifetime Warranty. STANLEY Tools warrants tape measures against deficiencies in material and workmanship for the useful life of the tool. STANLEY tape measures are inspected and tested before shipment and are believed to be free from defects in workmanship and material.
How does a retractable tape measure work?
These tapes generally are formed as a steel coiled tape contained within a plastic or metal casing with a coiled spring mounted within the coiled tape to provide a biasing force that tends to automatically recoil and rewind the tape within the casing.