Black diamond measuring tape

diamonds

What the Black Diamond on a measuring tape is for?

Ever noticed the little black diamonds or triangles on your tape measure? The diamonds start at the 19.2 inches mark on the tape and can be utilized to help correctly space the floor trusses for a 4×8 T&G sub-floor with a span rating of 20” o.c. The black diamonds provide a visual cue to help you work faster.

How do you read a tape measure meter?

How to Read a Tape MeasureFind/read the markings. On a standard tape measure, the biggest marking is the inch mark (which generally has the biggest number, if it has them).As the increments decrease, so does the length of the mark. Read 1 inch. Read one-half inch. The remaining markings follow a similar pattern.

Why is 16 inches marked on a tape measure?

Most tapes that have this only do it for the first few inches on the tool. As you extend the tape measure, you’ll probably see the numbers 16, 32, 48, 64, 80, 96 and so forth in red. The red indicates 16-inch-on-center spacing. This is a common framing spacing for wall studs, floor joists and common roof rafters.

What are the 16th marks on a tape measure?

Tape measures usually have a red mark every 16 inches. This makes it convenient to mark off wall studs or joists, which typically are 16 inches apart. Unless you are dealing with wall studs or joists, you can ignore this marker.

Why is a tape measure curved?

Have you ever wondered why the blade on your tape measure is curved? The concave design helps keep the blade rigid when extended. This curve allows the blade to “stand out” while measuring and helping you read the measurement.

What is the 8 foot rule?

It’s called the 8-foot rule. A leader at a manufacturing facility recently gave the direction to his leadership team to engage with their employees every time they come within eight feet of one of their employees. It’s a simple rule that is simply brilliant!

What is M on a measuring tape?

On many tapes (but by no means all) you will find a small red rectangle with the letter M printed inside followed by a number. The number simply denotes the year that the blade was stamped as conforming to the Measuring Instruments Directive. On the whole this will also be the year in which that tape was manufactured.

Where is the CM in tape measure?

If you have a metric tape measure, the numbers should be read like this: The large, numbered markings are centimeters. There is a smaller marking exactly halfway between the centimeters for ease of reading. The smallest markings are millimeters, or one tenth of a centimeter.

How many mm go into a CM?

10 Millimeters

You might be interested:  Citi diamond preferred review

What is 7 16 on a measuring tape?

Inch Fraction Decimal and Millimeter Equivalents

Fraction Decimal Millimeters
716 0.4375 11.1125
12 0.5 12.7
916 0.5625 14.2875
58 0.625 15.875

What is a Class 1 tape measure?

Classes explained Class 1 rated tapes are the most accurate and an error of no more than ±1.1mm over a 10m length can be anticipated, where a steel tape is used with a pulling force of 50N at 20°.

How can you tell your age with a tape measure?

Your tape measure should be doubled back on itself. Since it is 2011, you need to line up the end of the tape with 111. Next, find the year you were born. The corresponding number on the opposite side of the tape measure is how old you will be on your birthday this year.

How many 16ths are in an inch?

If you count the distance between the inch marks (one inch) you will find sixteen lines. This is because an inch is 16/16th of an inch long.

What does each line on a tape measure mean?

Similar to reading rulers, the large numbers on a standard tape measure are the inch marks. The number of lines between inch marks indicate the precision to which you can measure. In the case of an imperial tape measure, there are generally 16 marks to the inch, meaning you can measure up to 1/16 of an inch.diamonds

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

Diamond cut and clarity

What is the best cut and clarity of a diamond? Follow these recommendations to get the most value. Round Cut Diamonds: For Round Cut diamonds under 1 Carat, a VS2 or SI1 clarity grade will give you an eye-clean diamond (sometimes even SI2 doesn’t have visible inclsuions). For Round Cut diamonds 1 carat or over, […]

Blue diamond wasabi almonds

Are Blue Diamond Wasabi Almonds bad for you? Your taste buds will flip over these portion-controlled almonds. The health factor: Almonds are full of vitamin E and monounsaturated fats, making them a heart-smart snack. Plus, because they are simply dusted with wasabi and soy sauce, the sodium count remains under 5% of your daily recommended […]